Print Surface: Heated borosilicate glass bed covered with PEI print surface. Separate bed preparation is recommended when printing with flexible filaments, which can be found on the Flexystruder and FlexyDually Tool Head pages respectively.
Print Area: 280 mm x 280 mm x 250 mm (11.02 in x 11.02 in x 9.8 in)
Print Volume: 19,600 cm3 (1,185 in3) of usable space
Top Print Speed: 200 mm/sec (7.9 in/sec)
Average Print Speed: 30 - 50 mm/sec (1.18 - 1.97in) Using default nGen profile
Layer Thickness with 0.5 mm nozzle: 0.050 mm to 0.5 mm (0.002 in - 0.02 in)
Capable Materials: ABS, PLA, HIPS, PVA, wood filled filaments, Polyester (Tritan), PETT, bronze, copper, stainless steel-filled filaments, Polycarbonate, Nylon, PETG, conductive PLA and ABS, UV luminescent filaments, PCTPE, PC-ABS, Alloy 910, and more every day.
Discouraged Materials: 3D printing with carbon fiber filaments is not recommended at this time because carbon fiber filaments can degrade both the nozzle and hot end of the LulzBot TAZ 6 Tool Head.
Usable Filament Sizes: standard 3 mm (0.1 in)
Multi-Software Compatible: Freedom to use any number of 3D printing software programs, Cura LulzBot Edition ships standard! Other compatible Free Software options include OctoPrint, BotQueue, Slic3r, Printrun, MatterControl, and many more.
Power Requirements: 100 - 240 VAC
Power Output: 24 volt 500 watts 21 amp
Average Current Draw: 5.3 Amps (US), 2.65 Amps (EU)
Example Power Consumption: ABS
0.239kWh, 30 minute print
0.450 kWh, 60 minute print
Maximum Draw: 625 watts
Operating Temperature Range
Maximum Tool Head Temperature: 300°C (572°F)
Maximum Heated Bed Temperature: 120°C (248°F)
Certifications: CE. FCC, WEE