BCH50 38mm M6x30

Product #BCH501038-030

Rating
Not yet rated
Write | View
The B-LOC BCH50 Series 38 mm Compression Hub is an external locking device that provides a way to mount component(s), without the need for a hub, to a 38 mm diameter shaft. This is accomplished by creating a mechanical interference fit that will transmit 1145 Nm of torque.

Your Price: $171.92

Contact Customer Support

+1-800-243-3374
or
+1-717-665-2421
or
+44 (0) 870 7577007

Best Suited For:  Applications mounting thin components or components made from materials that do not perform well under tensile (hoop) stresses.  The most common use is mounting flat chain sprockets to a shaft. 

The B-LOC BCH50 Series 38 mm Compression Hub is an external locking device that provides a way to mount component(s) without the need for a hub.  This is accomplished by creating a mechanical interference fit that will never wear out. 


Features of Fenner Drives Compression Hubs:

• No Hub Required
• Ability to transmit high torques
• True zero-backlash
• Less equipment downtime
• Ability to mount over existing keyways
• Complete axial and radial adjustability
• Simple installation, adjustment and removal
• Extremely concentric and well-balanced mechanical interference fit
• No axial movement during installation

The basic function of B-LOC Compression Hubs is similar to other Fenner Drives Keyless Locking Devices. Axial force is applied by tightening a series of screws to engage sets of mating tapered rings. The inner tapered rings create radial force on the shaft resulting in a high pressure frictional connection. However, the difference from other keyless locking devices arises in how B-LOC Compression Hubs engage the mounted component. Rather than creating a radial force on the mounted component, the outer tapered rings are drawn together to generate an axial clamping force. In this way, the mounted component is not subjected to tensile (hoop) stresses. This operating principle also allows narrow components to be mounted with excellent runout.

Specifications

  • Series: BCH50
  • Torque Transmission: 1145 Nm
  • Axial Movement: No
  • Compliancy: RoHS
  • Component Bore Diameter: 66 mm
  • Component Thickness Range: 2.5 - 8.9 mm
  • Installation Torque: 16 Nm
  • Internal/ External: External
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Releasing
  • Screw Size: M6 x 30
  • Self-Centering: Yes
  • Shaft Diameter: 38 mm
  • Taper: Double
  • Thrust: 60.2 kN
  • Outside Diameter: 84 mm

 

Average Customer Rating

Not yet rated

To write a review you must Log In

Need Help?

Please only use this form for questions or comments specifically related to products or information on this particular page. For any other questions or comments, please use our general contact us form.

  •  

  •  

  •  
  •  
Back To Top