B-LOC Shrink Disc 80-10

Product #B0801

Rating
Not yet rated
Write | View
The B-LOC SD10 Series 80-10 Shrink Disc is an external locking device that provides a high capacity, zero-backlash shaft to hub on shafts ranging from 2-3/8” to 2.580” in diameter by means of a mechanical interference fit and transmits between 3416 ft lbs and 4331 ft lbs of torque depending on the specific shaft size.

Your Price: $147.50

Contact Customer Support

+1-800-243-3374
or
+1-717-665-2421
or
+44 (0) 870 7577007

Best Suited For: Applications needing to connect a hollow shaft over a solid shaft. Commonly used on hollow output shaft gear boxes or flange couplings.

B-LOC SD10 Series 80-10 Shrink Discs are external locking devices that provide a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending, and/or radial loads. The SD10 Series Shrink Discs are also extremely concentric and maintain a well-balanced mechanical interference fit. There is no axial movement during installation of this product.

• Extremely concentric and well-balanced mechanical interference fit
• No axial movement during installation

Features of Fenner Drives Keyless Bushings:

• Ability to transmit high torques
• True zero-backlash
• Less equipment downtime
• Ability to mount over existing keyways
• Complete axial and radial adjustability
• Simple installation, adjustment and removal

All Fenner Drives keyless locking devices operate using the simple wedge principle. An axial force is applied- by either a hex nut (Trantorque) or a series of annular screws (B-LOC)- to engage circular steel rings with mating tapers. The resulting wedge action creates a radial force on the tapered rings, one of which contracts to squeeze the shaft while the other expands and presses into the component bore.

  • Series: SD
  • Axial Movement: No
  • Installation Torque: 22 ft lb
  • Internal/ External: External
  • Material: Zinc Chromate/Chrome Plated Steel
  • Metric/Inch: Inch
  • Releasing/ Locking: Releasing
  • Screw Size: M8 x 25
  • Self-Centering: Yes
  • Shaft Diameter: 2.375-2.580
  • Taper: Double
  • Torque Max: 4331
  • Torque Min: 3416

Average Customer Rating

Not yet rated

To write a review you must Log In

Need Help?

Please only use this form for questions or comments specifically related to products or information on this particular page. For any other questions or comments, please use our general contact us form.

  •  

  •  

  •  
  •  
Back To Top