B-LOC B106 20mm

Product #T601020

Rating
Not yet rated
Write | View
The B-LOC B106 Series 20mm Keyless Bushing provides a high capacity, zero-backlash shaft to hub connection for shafts measuring 20mm in diameter by means of a mechanical interference fit and transmits up to a maximum of 262 Nm of torque.

Your Price: $33.07

Contact Customer Support

+1-800-243-3374
or
+1-717-665-2421
or
+44 (0) 870 7577007

Best Suited For: Applications where having no axial movement of the mounted component relative to the shaft during tightening is critical and recessed mounting is not important (component mounts against the flange of the bushing).

B-LOC B106 Series 20mm Keyless Bushing provides a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending, and/or radial loads. Their shallow, single taper design with integrated push-off threads maintains exceptional concentricity and the ability to transmit bending loads. The B-LOC B106 Series Keyless Bushing design eliminates any axial movement during installation making the installation process more precise. This series is also RoHS compliant.

• Shallow, single taper design with integrated push-off threads
• Exceptional concentricity
• Optional integrated spacer sleeve to mount narrow hub components
• No axial movement during installation
• RoHS compliant


** B-LOC Series B106 Keyless Bushings are also available with optional integrated spacer sleeve (ideal for very narrow drive elements). Spacers are 0.275” wide for B106 sizes with D = 2.559” and smaller, and 0.315” wide for all others.

Features of Fenner Drives Keyless Bushings:

• Ability to transmit higher torques
• True zero-backlash
• Less equipment downtime
• Ability to mount over existing keyways
• Complete axial and radial adjustability
• Simple installation, adjustment and removal

All Fenner Drives keyless locking devices operate using the simple wedge principle. An axial force is applied- by either a hex nut (Trantorque) or a series of annular screws (B-LOC)- to engage circular steel rings with mating tapers. The resulting wedge action creates a radial force on the tapered rings, one of which contracts to squeeze the shaft while the other expands and presses into the component bore.

  • Series: B106
  • Torque Transmission: 262
  • Axial Movement: No
  • Bore Tolerance: 47.05
  • Compliancy: RoHS
  • Component Bore Diameter: 47mm
  • Hub Pressure: 87
  • Installation Torque: 16 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Screw Size: M6 x 20
  • Self-Centering: Yes
  • Shaft Diameter: 20mm
  • Shaft Tolerance: 19.95
  • Taper: Single
  • Thrust: 26234

Average Customer Rating

Not yet rated

To write a review you must Log In

Need Help?

Please only use this form for questions or comments specifically related to products or information on this particular page. For any other questions or comments, please use our general contact us form.

  •  

  •  

  •  
  •  
Back To Top