|
|
||||||||||||||
 |
NuTLink Power Ratings for D/32 Section Belt
Add-on Kilowatt per Belt for Speed Ratio
Return to HPC V-Belts Technical Data Page
| RPM of Faster Shaft | Basic Kilowatt per Belt for Small Pulley Datum Diameter |
|||||
355mm |
375mm |
400mm |
425mm |
450mm |
560mm |
|
700 |
19.42 |
21.15 |
23.30 |
25.37 |
27.42 |
35.71 |
950 |
23.50 |
25.54 |
28.04 |
30.89 |
— |
— |
200 |
7.17 |
7.79 |
8.56 |
9.33 |
10.10 |
13.39 |
400 |
12.71 |
13.85 |
15.26 |
16.65 |
18.04 |
23.91 |
600 |
17.39 |
18.94 |
20.87 |
22.77 |
24.64 |
32.35 |
800 |
21.22 |
23.10 |
25.42 |
27.65 |
29.83 |
38.35 |
1000 |
24.13 |
26.21 |
— |
— |
— |
— |
1200 |
26.02 |
— |
— |
— |
— |
— |
* Indicates diameters below minimum recommended for B V-belt. Can be used only if a reduction in belt service life is acceptable.
RPM |
Add-on Kilowatt per Belt for Speed Ratio |
|||||
1.00 to 1.01 |
1.05 to 1.07 |
1.11 to 1.14 |
1.21 to 1.27 |
1.40 to 1.64 |
1.65 and higher |
|
700 |
0.00 |
0.01 |
0.04 |
0.06 |
0.08 |
0.09 |
950 |
0.00 |
0.03 |
0.05 |
0.08 |
0.11 |
0.12 |
200 |
0.00 |
0.01 |
0.01 |
0.01 |
0.02 |
0.02 |
400 |
0.00 |
0.01 |
0.02 |
0.03 |
0.04 |
0.05 |
600 |
0.00 |
0.01 |
0.03 |
0.05 |
0.07 |
0.08 |
800 |
0.00 |
0.02 |
0.04 |
0.07 |
0.10 |
0.10 |
1000 |
0.00 |
0.03 |
0.05 |
0.09 |
0.12 |
0.13 |
1200 |
0.00 |
0.03 |
0.07 |
0.10 |
0.14 |
0.16 |
| Copyright © 2008 Fenner Drives - Privacy Policy - Terms & Conditions |