|
|
||||||||||||||
 |
PowerTwist Plus Power Ratings for A/13 Section Belt
Add-on Kilowatt per Belt for Speed Ratio
Return to HPC V-Belts Technical Data Page
| RPM of Faster Shaft | Basic Kilowatt per Belt for Small Pulley Datum Diameter |
|||||||||
80mm |
90mm | 95mm | 106mm |
125mm |
132mm |
140mm | 150mm | 160mm | 180mm | |
950 |
0.84 | 1.06 | 1.17 | 1.41 | 1.82 | 1.97 | 2.13 | 2.34 | 2.55 | 2.95 |
1450 |
1.15 | 1.46 | 1.63 | 1.97 | 2.55 | 2.76 | 2.99 | 3.28 | 3.57 | 4.13 |
2850 |
1.77 | 2.32 | 2.60 | 3.17 | 4.12 | 4.46 | 4.82 | 5.26 | 5.70 | 6.48 |
200 |
0.25 | 0.30 | 0.33 | 0.39 | 0.49 | 0.53 | 0.57 | 0.63 | 0.68 | 0.78 |
400 |
0.43 | 0.53 | 0.59 | 0.69 | 0.89 | 0.96 | 1.04 | 1.13 | 1.23 | 1.42 |
600 |
0.59 | 0.74 | 0.81 | 0.98 | 1.25 | 1.35 | 1.46 | 1.60 | 1.74 | 2.01 |
800 |
0.74 | 0.93 | 1.03 | 1.23 | 1.58 | 1.72 | 1.86 | 2.03 | 2.21 | 2.56 |
1000 |
0.87 | 1.10 | 1.22 | 1.47 | 1.90 | 2.06 | 2.23 | 2.44 | 2.65 | 3.08 |
1200 |
1.00 | 1.27 | 1.41 | 1.70 | 2.20 | 2.38 | 2.58 | 2.83 | 3.08 | 3.56 |
1400 |
1.12 | 1.42 | 1.58 | 1.92 | 2.48 | 2.68 | 2.92 | 3.19 | 3.47 | 4.02 |
1600 |
1.22 | 1.57 | 1.74 | 2.12 | 2.75 | 2.98 | 3.23 | 3.54 | 3.86 | 4.45 |
1800 |
1.33 | 1.71 | 1.90 | 2.31 | 3.01 | 3.25 | 3.53 | 3.87 | 4.21 | 4.85 |
2000 |
1.42 | 1.84 | 2.05 | 2.50 | 3.24 | 3.51 | 3.81 | 4.18 | 4.54 | 5.23 |
2200 |
1.51 | 1.97 | 2.19 | 2.67 | 3.47 | 3.77 | 4.08 | 4.47 | 4.85 | 5.58 |
2400 |
1.60 | 2.08 | 2.33 | 2.83 | 3.68 | 4.00 | 4.33 | 4.74 | 5.14 | 5.89 |
2600 |
1.68 | 2.19 | 2.45 | 2.99 | 3.89 | 4.21 | 4.56 | 4.98 | 5.40 | 6.17 |
2800 |
1.75 | 2.30 | 2.57 | 3.13 | 4.07 | 4.41 | 4.77 | 5.21 | 5.64 | — |
3000 |
1.82 | 2.39 | 2.68 | 3.27 | 4.25 | 4.59 | 4.97 | 5.41 | 5.85 | — |
3200 |
1.89 | 2.48 | 2.77 | 3.39 | 4.41 | 4.77 | 5.15 | 5.60 | — | — |
3400 |
1.94 | 2.56 | 2.87 | 3.51 | 4.55 | 4.91 | 5.30 | — | — | — |
3600 |
1.99 | 2.63 | 2.95 | 3.62 | 4.68 | 5.05 | — | — | — | — |
3800 |
2.04 | 2.70 | 3.03 | 3.71 | 4.79 | — | — | — | — | — |
4000 |
2.08 | 2.76 | 3.10 | 3.80 | — | — | — | — | — | — |
4200 |
2.11 | 2.82 | 3.16 | 3.86 | — | — | — | — | — | — |
4400 |
2.14 | 2.86 | 3.21 | 3.93 | — | — | — | — | — | — |
4600 |
2.16 | 2.90 | 3.26 | — | — | — | — | — | — | — |
4800 |
2.18 | 2.93 | 3.34 | — | — | — | — | — | — | — |
5000 |
2.19 | 2.95 | — | — | — | — | — | — | — | — |
| 5200 | 2.20 | 2.97 | — | — | — | — | — | — | — | — |
5400 |
2.20 | 2.97 | — | — | — | — | — | — | — | — |
RPM |
Add-on Kilowatt per Belt for Speed Ratio |
|||||
1.00 to 1.01 |
1.05 to 1.07 |
1.11 to 1.14 |
1.21 to 1.27 |
1.40 to 1.64 |
1.65 and higher |
|
950 |
0.00 | 0.03 | 0.06 | 0.10 | 0.13 | 0.14 |
1450 |
0.00 | 0.04 | 0.10 | 0.14 | 0.19 | 0.22 |
2850 |
0.00 | 0.10 | 0.19 | 0.28 | 0.37 | 0.43 |
200 |
0.00 | 0.01 | 0.01 | 0.01 | 0.02 | 0.02 |
400 |
0.00 | 0.01 | 0.02 | 0.03 | 0.04 | 0.05 |
600 |
0.00 | 0.01 | 0.03 | 0.05 | 0.07 | 0.07 |
800 |
0.00 | 0.02 | 0.04 | 0.07 | 0.09 | 0.10 |
1000 |
0.00 | 0.03 | 0.05 | 0.08 | 0.11 | 0.12 |
1200 |
0.00 | 0.03 | 0.07 | 0.10 | 0.13 | 0.15 |
1400 |
0.00 | 0.04 | 0.07 | 0.11 | 0.15 | 0.17 |
1600 |
0.00 | 0.04 | 0.09 | 0.13 | 0.17 | 0.19 |
1800 |
0.00 | 0.05 | 0.10 | 0.15 | 0.19 | 0.22 |
2000 |
0.00 | 0.05 | 0.11 | 0.16 | 0.22 | 0.25 |
2200 |
0.00 | 0.06 | 0.12 | 0.18 | 0.24 | 0.27 |
2400 |
0.00 | 0.07 | 0.13 | 0.19 | 0.26 | 0.29 |
2600 |
0.00 | 0.07 | 0.14 | 0.22 | 0.28 | 0.32 |
2800 |
0.00 | 0.07 | 0.15 | 0.23 | 0.31 | 0.34 |
3000 |
0.00 | 0.08 | 0.16 | 0.25 | 0.33 | 0.37 |
3200 |
0.00 | 0.09 | 0.17 | 0.26 | 0.35 | 0.40 |
3400 |
0.00 | 0.09 | 0.19 | 0.28 | 0.37 | 0.42 |
3600 |
0.00 | 0.10 | 0.19 | 0.29 | 0.40 | 0.44 |
3800 |
0.00 | 0.10 | 0.21 | 0.31 | 0.42 | 0.47 |
4000 |
0.00 | 0.11 | 0.22 | 0.33 | 0.44 | 0.49 |
4200 |
0.00 | 0.11 | 0.23 | 0.34 | 0.45 | 0.51 |
4400 |
0.00 | 0.12 | 0.24 | 0.36 | 0.48 | 0.54 |
4600 |
0.00 | 0.13 | 0.25 | 0.37 | 0.50 | 0.57 |
4800 |
0.00 | 0.13 | 0.26 | 0.40 | 0.52 | 0.59 |
5000 |
0.00 | 0.13 | 0.28 | 0.41 | 0.54 | 0.61 |
5200 |
0.00 | 0.14 | 0.28 | 0.43 | 0.57 | 0.64 |
5400 |
0.00 | 0.15 | 0.29 | 0.44 | 0.59 | 0.66 |
| Copyright © 2008 Fenner Drives - Privacy Policy - Terms & Conditions |