Keyless Locking Devices

Trantorque B-LOC

Fenner Drives is pleased to present our comprehensive line of Keyless Locking Devices. Only Fenner Drives delivers a product line that offers quick and easy installation with Trantorque plus the design flexibility and extra heavy duty capacity with B-LOC.

Why go keyless?

 Today’s global marketplace demands precise, efficient machines that optimize productivity while minimizing material and fabrication costs. When compared to traditional connection methods, Fenner Drives Keyless Locking Devices offer the following advantages:

  • A mechanical interference fit with a uniform pressure distribution similar to that achieved through a shrink or press fit.
  • A true zero backlash shaft-to-hub connection with none of the operational drawbacks of keyways or splines.
  • The ability to mount on plain shafting, which need not be over-sized to compensate for notch factors. This allows the use of smaller shafts and bearings for more cost effective designs.

Click on one of our product lines for more information or to browse Fenner Drives full range of Keyless Bushings and Specialty Locking Devices.

Trantorque Keyless Bushings B-LOC Keyless Bushings B-LOC WK Couplings B-LOC SPEED
Trantorque Micro B-LOC Shrink Discs B-LOC Compression Hubs  
       

If you have a complex application, Fenner Drives New Product Development Group is ready to innovate with you through our Made To Order capabilities.

 

B-LOC SPEED is a new series of keyless locking devices engineered to reduce installation time while maintaining performance. The unique design allows for the same technical capabilities of a standard keyless locking device, but with reduced installation time of up to 60%.

Click for additional information

Tantorque Micro is a patent pending keyless locking solution for small shaft applications that require precision positioning.

Click for additional Information

 

To compare items, select up to 4 and click here

Image of Trantorque GT 35mm

  • Series: Trantorque GT
  • Torque Transmission: 585 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 60.5 mm
  • Hub Pressure: 33 N/mm2
  • Installation Torque: 260 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 35 mm
  • Taper: Single
  • Thrust: 31 kN

Image of Trantorque GT 2-1/8"

  • Series: Trantorque GT
  • Torque Transmission: 1120 ft lb
  • Axial Movement: Approximately 0.075"
  • Compliancy: RoHS
  • Component Bore Diameter: 3 1/8"
  • Hub Pressure: 4457 psi
  • Installation Torque: 442 ft lb
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Inch
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 2 1/8"
  • Taper: Single
  • Thrust: 11793 lbs

Image of Trantorque GT 2-7/16"

  • Series: Trantorque GT
  • Torque Transmission: 1245 ft lb
  • Axial Movement: Approximately 0.075"
  • Compliancy: RoHS
  • Component Bore Diameter: 3 3/8"
  • Hub Pressure: 3789 psi
  • Installation Torque: 467 ft lb
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Inch
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 2 7/16"
  • Taper: Single
  • Thrust: 11430 lbs

Image of Trantorque GT 34mm

  • Series: Trantorque GT
  • Torque Transmission: 569 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 60.5 mm
  • Hub Pressure: 33 N/mm2
  • Installation Torque: 260 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 34 mm
  • Taper: Single
  • Thrust: 31 kN

Image of Trantorque GT 65mm

  • Series: Trantorque GT
  • Torque Transmission: 1759 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 92 mm
  • Hub Pressure: 23 N/mm2
  • Installation Torque: 678 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 65 mm
  • Taper: Single
  • Thrust: 50 kN

Image of Trantorque GT 18mm

  • Series: Trantorque GT
  • Torque Transmission: 252 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 38 mm
  • Hub Pressure: 93 N/mm2
  • Installation Torque: 136 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 18 mm
  • Taper: Single
  • Thrust: 26kN

Image of Trantorque GT 2-1/4"

  • Series: Trantorque GT
  • Torque Transmission: 1186 ft lb
  • Axial Movement: Approximately 0.075"
  • Compliancy: RoHS
  • Component Bore Diameter: 3 1/8"
  • Hub Pressure: 4457 psi
  • Installation Torque: 442 ft lb
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Inch
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 2 1/4"
  • Taper: Single
  • Thrust: 11793 lbs

Image of Trantorque GT 25mm

  • Series: Trantorque GT
  • Torque Transmission: 366 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 45 mm
  • Hub Pressure: 64 N/mm2
  • Installation Torque: 169 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 25 mm
  • Taper: Single
  • Thrust: 27 kN

Image of Trantorque GT 2-3/16"

  • Series: Trantorque GT
  • Torque Transmission: 1153 ft lb
  • Axial Movement: Approximately 0.075"
  • Compliancy: RoHS
  • Component Bore Diameter: 3 1/8"
  • Hub Pressure: 4457 psi
  • Installation Torque: 442 ft lb
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Inch
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 2 3/16"
  • Taper: Single
  • Thrust: 11793 lbs

Image of Trantorque GT 38mm

  • Series: Trantorque GT
  • Torque Transmission: 636 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 60.5 mm
  • Hub Pressure: 33 N/mm2
  • Installation Torque: 260 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 38 mm
  • Taper: Single
  • Thrust: 31 kN

Image of Trantorque GT 1-1/4"

  • Series: Trantorque GT
  • Torque Transmission: 372 ft lb
  • Axial Movement: Approximately 0.075"
  • Compliancy: RoHS
  • Component Bore Diameter: 2"
  • Hub Pressure: 8313 psi
  • Installation Torque: 167 ft lb
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Inch
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 1 1/4"
  • Taper: Single
  • Thrust: 7014 lbs

Image of Trantorque GT 2-7/8"

  • Series: Trantorque GT
  • Torque Transmission: 1485 ft lb
  • Axial Movement: Approximately 0.075"
  • Compliancy: RoHS
  • Component Bore Diameter: 3 7/8"
  • Hub Pressure: 3014 psi
  • Installation Torque: 550 ft lb
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Inch
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 2 7/8"
  • Taper: Single
  • Thrust: 11555 lbs

Image of Trantorque GT 1-1/2"

  • Series: Trantorque GT
  • Torque Transmission: 471 ft lb
  • Axial Movement: Approximately 0.075"
  • Compliancy: RoHS
  • Component Bore Diameter: 2 3/8"
  • Hub Pressure: 4842 psi
  • Installation Torque: 192 ft lb
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Inch
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 1 1/2"
  • Taper: Single
  • Thrust: 7019 lbs

Image of Trantorque GT 42mm

  • Series: Trantorque GT
  • Torque Transmission: 765 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 67mm
  • Hub Pressure: 29 N/mm2
  • Installation Torque: 317 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 42mm
  • Taper: Single
  • Thrust: 34 kN

Image of Trantorque GT 45mm

  • Series: Trantorque GT
  • Torque Transmission: 1296 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 73 mm
  • Hub Pressure: 36 N/mm2
  • Hub Pressure: 54 kN
  • Installation Torque: 555 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 45 mm
  • Taper: Single

Image of Trantorque GT 1-1/16"

  • Series: Trantorque GT
  • Torque Transmission: 333 ft lb
  • Axial Movement: Approximately 0.075"
  • Compliancy: RoHS
  • Component Bore Diameter: 2"
  • Hub Pressure: 8313 psi
  • Installation Torque: 167 ft lb
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Inch
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 1 1/16"
  • Taper: Single
  • Thrust: 7014 lbs
Back To Top