Keyless Locking Devices

Trantorque B-LOC

Fenner Drives is pleased to present our comprehensive line of Keyless Locking Devices. Only Fenner Drives delivers a product line that offers quick and easy installation with Trantorque plus the design flexibility and extra heavy duty capacity with B-LOC.

Why go keyless?

 Today’s global marketplace demands precise, efficient machines that optimize productivity while minimizing material and fabrication costs. When compared to traditional connection methods, Fenner Drives Keyless Locking Devices offer the following advantages:

  • A mechanical interference fit with a uniform pressure distribution similar to that achieved through a shrink or press fit.
  • A true zero backlash shaft-to-hub connection with none of the operational drawbacks of keyways or splines.
  • The ability to mount on plain shafting, which need not be over-sized to compensate for notch factors. This allows the use of smaller shafts and bearings for more cost effective designs.

Click on one of our product lines for more information, download our Everything KLD brochure, or browse Fenner Drives full range of Keyless Bushings and Specialty Locking Devices.

Trantorque Keyless Bushings B-LOC Keyless Bushings B-LOC WK Couplings B-LOC SPEED
Trantorque Micro B-LOC Shrink Discs B-LOC Compression Hubs  
       

If you have a complex application, Fenner Drives New Product Development Group is ready to innovate with you through our Made To Order capabilities.

 

B-LOC SPEED is a new series of keyless locking devices engineered to reduce installation time while maintaining performance. The unique design allows for the same technical capabilities of a standard keyless locking device, but with reduced installation time of up to 60%.

Click for additional information

Tantorque Micro is a patent pending keyless locking solution for small shaft applications that require precision positioning.

Click for additional Information

 

To compare items, select up to 4 and click here

  • Page:

Image of Trantorque GT 28mm

  • Series: Trantorque GT
  • Torque Transmission: 466 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 51 mm
  • Hub Pressure: 57 N/mm2
  • Installation Torque: 226 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 28 mm
  • Taper: Single
  • Thrust: 31 kN

Image of B-LOC B103 170mm

  • Series: B103
  • Torque Transmission: 44378 Nm
  • Axial Movement: Approximately 0.8 mm
  • Bore Tolerance: 225.08
  • Compliancy: RoHS
  • Component Bore Diameter: 225mm
  • Hub Pressure: 140
  • Installation Torque: 183 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Screw Size: M14 x 40
  • Self-Centering: Yes
  • Shaft Diameter: 170mm
  • Shaft Tolerance: 169.92
  • Taper: Single
  • Thrust: 522099

Image of B-LOC B103 38mm

B-LOC B103 38mm

More Information

  • Series: B103
  • Torque Transmission: 1106 Nm
  • Axial Movement: Approximately 0.8 mm
  • Bore Tolerance: 65.05
  • Compliancy: RoHS
  • Component Bore Diameter: 65mm
  • Hub Pressure: 140
  • Installation Torque: 14 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Screw Size: M6 x 20
  • Self-Centering: Yes
  • Shaft Diameter: 38mm
  • Shaft Tolerance: 37.95
  • Taper: Single
  • Thrust: 58193

Image of B-LOC B103 200mm

  • Series: B103
  • Torque Transmission: 65262 Nm
  • Axial Movement: Approximately 0.8 mm
  • Bore Tolerance: 260.08
  • Compliancy: RoHS
  • Component Bore Diameter: 260mm
  • Hub Pressure: 151
  • Installation Torque: 183 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Screw Size: M14 x 40
  • Self-Centering: Yes
  • Shaft Diameter: 200mm
  • Shaft Tolerance: 199.92
  • Taper: Single
  • Thrust: 652624

Image of Trantorque GT 16mm

  • Series: Trantorque GT
  • Torque Transmission: 224 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 38 mm
  • Hub Pressure: 93 N/mm2
  • Installation Torque: 136 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 16 mm
  • Taper: Single
  • Thrust: 26 kN

Image of B-LOC B103 70mm

B-LOC B103 70mm

More Information

  • Series: B103
  • Torque Transmission: 6151 Nm
  • Axial Movement: Approximately 0.8 mm
  • Bore Tolerance: 110.05
  • Compliancy: RoHS
  • Component Bore Diameter: 110mm
  • Hub Pressure: 177
  • Installation Torque: 68 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Screw Size: M10 x 30
  • Self-Centering: Yes
  • Shaft Diameter: 70mm
  • Shaft Tolerance: 69.95
  • Taper: Single
  • Thrust: 175750

Image of Trantorque GT 55mm

  • Series: Trantorque GT
  • Torque Transmission: 1549 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 80 mm
  • Hub Pressure: 31 N/mm2
  • Installation Torque: 599 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 55 mm
  • Taper: Single
  • Thrust: 53 kN

Image of Trantorque GT 30mm

  • Series: Trantorque GT
  • Torque Transmission: 499 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 51 mm
  • Hub Pressure: 57 N/mm2
  • Installation Torque: 226 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 30 mm
  • Taper: Single
  • Thrust: 31 kN

Image of Trantorque GT 24mm

  • Series: Trantorque GT
  • Torque Transmission: 351 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 45 mm
  • Hub Pressure: 64 N/mm2
  • Installation Torque: 169 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 24 mm
  • Taper: Single
  • Thrust: 24 kN

Image of Trantorque GT 35mm

  • Series: Trantorque GT
  • Torque Transmission: 585 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 60.5 mm
  • Hub Pressure: 33 N/mm2
  • Installation Torque: 260 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 35 mm
  • Taper: Single
  • Thrust: 31 kN

Image of B-LOC B103 95mm

B-LOC B103 95mm

More Information

  • Series: B103
  • Torque Transmission: 10435 Nm
  • Axial Movement: Approximately 0.8 mm
  • Bore Tolerance: 135.08
  • Compliancy: RoHS
  • Component Bore Diameter: 135mm
  • Hub Pressure: 180
  • Installation Torque: 68 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Screw Size: M10 x 30
  • Self-Centering: Yes
  • Shaft Diameter: 95mm
  • Shaft Tolerance: 94.95
  • Taper: Single
  • Thrust: 219688

Image of Trantorque GT 34mm

  • Series: Trantorque GT
  • Torque Transmission: 569 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 60.5 mm
  • Hub Pressure: 33 N/mm2
  • Installation Torque: 260 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 34 mm
  • Taper: Single
  • Thrust: 31 kN

Image of Trantorque GT 65mm

  • Series: Trantorque GT
  • Torque Transmission: 1759 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 92 mm
  • Hub Pressure: 23 N/mm2
  • Installation Torque: 678 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 65 mm
  • Taper: Single
  • Thrust: 50 kN

Image of Trantorque GT 18mm

  • Series: Trantorque GT
  • Torque Transmission: 252 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 38 mm
  • Hub Pressure: 93 N/mm2
  • Installation Torque: 136 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 18 mm
  • Taper: Single
  • Thrust: 26kN

Image of Trantorque GT 25mm

  • Series: Trantorque GT
  • Torque Transmission: 366 Nm
  • Axial Movement: Approximately 1.9 mm
  • Compliancy: RoHS
  • Component Bore Diameter: 45 mm
  • Hub Pressure: 64 N/mm2
  • Installation Torque: 169 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 25 mm
  • Taper: Single
  • Thrust: 27 kN

Image of B-LOC B103 60mm

B-LOC B103 60mm

More Information

  • Series: B103
  • Torque Transmission: 3251 Nm
  • Axial Movement: Approximately 0.8 mm
  • Bore Tolerance: 90.05
  • Compliancy: RoHS
  • Component Bore Diameter: 90mm
  • Hub Pressure: 160
  • Installation Torque: 34 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Screw Size: M8 x 25
  • Self-Centering: Yes
  • Shaft Diameter: 60mm
  • Shaft Tolerance: 59.95
  • Taper: Single
  • Thrust: 108368
  • Page:
Back To Top