Trantorque OE 15/16"

Product #6410094

Rating
Not yet rated
Write | View
The Trantorque OE Series 15/16” Keyless Bushing provides a high capacity, zero-backlash shaft/hub or coupling connection of mounted components to shafts measuring 15/16” in diameter by means of a mounted mechanical interference fit and transmits up to 292 ft lbs of torque.

The product selected is not currently available for purchase.

Contact Customer Support

+1-800-243-3374
or
+1-717-665-2421
or
+44 (0) 870 7577007

Best Suited For: Applications where speed and simplicity of installation and repositioning are critical and a small OD/ID ratio is important.

Trantorque OE Series 15/16” Keyless Bushings provide a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending, and/or radial loads. While maintaining a minimal OD/ID ratio, The Trantorque OE Series Keyless Bushings also have exceptional concentricity and the ability to accommodate bending loads. They also have limited axial movement during installation. All Trantorque units use a single hex nut for speed and simplicity of installation.

• Exceptional concentricity and ability to accommodate bending loads
• Limited axial movement during installation
• Minimal OD/ID ratio
• All Trantorque units use a single hex nut for speed and simplicity of installation

Features of Fenner Drives Keyless Bushings:

• Ability to transmit higher torques than keyed connections
• True zero-backlash
• Less equipment downtime
• Ability to mount over existing keyways
• Complete axial and radial adjustability
• Simple installation, adjustment and removal

All Fenner Drives keyless locking devices operate using the simple wedge principle. An axial force is applied- by either a hex nut (Trantorque) or a series of annular screws (B-LOC)- to engage circular steel rings with mating tapers. The resulting wedge action creates a radial force on the tapered rings, one of which contracts to squeeze the shaft while the other expands and presses into the component bore.

  • Series: Trantorque OE
  • Torque Transmission: 311 ft lb
  • Axial Movement: Approximately 0.075"
  • Compliancy: RoHS
  • Component Bore Diameter: 1 1/2"
  • Hub Pressure: 18746 psi
  • Installation Torque: 137 ft lb
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Inch
  • Releasing/ Locking: Locking
  • Self-Centering: Yes
  • Shaft Diameter: 15/16"
  • Taper: Single
  • Thrust: 7601 lbf

Average Customer Rating

Not yet rated

To write a review you must Log In

Need Help?

Please only use this form for questions or comments specifically related to products or information on this particular page. For any other questions or comments, please use our general contact us form.

  •  

  •  

  •  
  •  
Back To Top