Proven Results! There's a revolution
underway in V-belt technology. And unless you're using red PowerTwist Plus V-Belts
from Fenner Drives, you're in danger of getting left behind. When the going gets
tough, PowerTwist Plus V-Belts can outperform conventional rubber endless V-Belts
hands-down. That's why more and more people are saying "Yes!" to red PowerTwist
Plus.
See why PowerTwist Plus V-Belts may be the perfect belts for your application!
PowerTwist Plus can't be outperformed!
PowerTwist Plus sets the standard for link V-belt longevity and durability. Other
brands don't come close. The combination of high strength and low elongation under
load simply cannot be beaten. Because they're made of a custom-designed, high-tech
polyurethane/polyester composite, PowerTwist Plus V-belts won't fail you when others
may. The result? Less downtime. Higher productivity. Reduced maintenance costs.
The right belt at the right time!
Instead of trying to carry all the endless V-belt sizes you might need, with PowerTwist
Plus, you only need to stock the most common cross sections - 3L, 4L/A, 5L/B, C
and D - and you'll have almost 100%, on-site availability guaranteed. PowerTwist
Plus is available in 2m, 10m and 30m lengths. With PowerTwist Plus you will reduce
the inventory dollars you have tied up in replacement V-belts and still have instant
availability.
Back to top
No tools required.
No matter what equipment you are operating, productivity is critical. PowerTwist
Plus V-Belts minimize downtime with no tools required, easy installation in minutes
without machine tear-downs or struggling with rusted-down motor bases.
PowerTwist Plus V-Belts have the same cross section dimensions as conventional endless
V-belts and can be installed on existing pulleys with no changes in set-up.
Single or matched V-belt sets can be made with a flick of the wrist! PowerTwist
Plus V-Belts can be made up to required length by hand in seconds and rolled onto
the drive just like a bicycle chain. Their custom multi-ply composite construction
prevents roll-on damage. If conventional rubber V-belts are installed this way,
almost certainly some of the load-bearing tension cords will be broken, leading
to significantly reduced belt life.
Tame hostile environments
If your V-belt drives are operating in hostile, nasty environments, you've got to
take advantage of the high performance properties of polyurethanes. That's why we
use a high performance polyurethane elastomer reinforced with multiple plies of
polyester fabric for PowerTwist Plus. This custom material provides PowerTwist Plus
with significantly superior resistance to oils, grease, water, most common industrial/agricultural
chemicals and solvents. Plus an operating temperature range, with no loss of performance,
of -40º F to +240º F. Conventional SBR/chloroprene brand V-belts simply
can't compete.
If your drive environment is like hell's kitchen and conventional V-belt life is
down to a few months, PowerTwist Plus may be your long term answer.
Back to top
Reduce transmitted vibration.
All conventional V-belts with a continuous internal mono tension cord will transmit
vibrations from the motor to driveN components; these vibrations cause system noise
and can significantly shorten bearing life. The segmented twist-lock design of PowerTwist
Plus acts as a vibration dampener - vibration can enter a link but cannot be transmitted
as there is no continuous tension cord present.Save your bearings - fit PowerTwist
Plus V-belts! Send me a catalog
So that we can assist you with your drive design, please fill out the
application data sheet and fax to: (717) 665-2649.
The color red for link V-belts is registered in the U.S. Patent and Trademark Office
as a trademark of Fenner US, Inc.