B-LOC B103 95mm

Product #T301095

Not yet rated
Write | View
The B-LOC B103 Series 95mm Keyless Bushing provides a high capacity, zero-backlash shaft to hub connection for shafts measuring 95mm in diameter by means of a mechanical interference fit and transmits up to a maximum of 10435 Nm of torque.

Your Price: $153.37

Contact Customer Support

+44 (0) 870 7577007

Best Suited For: Applications that require a recessed installation of the bushing, but can accommodate some axial movement of the mounted component relative to the shaft during tightening.

B-LOC B103 Series 95mm Keyless Bushing provides a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending, and/or radial loads. Their shallow, single taper design with integrated push-off threads maintains exceptional concentricity and the ability to transmit bending loads. Since the B-LOC B103 Series Keyless Bushings do not have a flange, the external diameter along the unit’s entire length is the same, therefore allowing the unit to be completely inserted into the component bore for flushed or recessed mounting. The B103 Series also has limited axial movement during installation and is RoHS compliant.

• Shallow, single taper design with integrated push-off threads
• Exceptional concentricity and ability to transmit bending loads
• Limited axial movement during installation
• Recessed installation without the need for a counterbore
• RoHS compliant

Note: Flange of B103 Series Keyless Bushing should be located inside of hub bore.

Features of Fenner Drives Keyless Bushings:

• Ability to transmit higher torques
• True zero-backlash
• Less equipment downtime
• Ability to mount over existing keyways
• Complete axial and radial adjustability
• Simple installation, adjustment and removal

All Fenner Drives keyless locking devices operate using the simple wedge principle. An axial force is applied- by either a hex nut (Trantorque) or a series of annular screws (B-LOC)- to engage circular steel rings with mating tapers. The resulting wedge action creates a radial force on the tapered rings, one of which contracts to squeeze the shaft while the other expands and presses into the component bore.

  • Series: B103
  • Torque Transmission: 10435 Nm
  • Axial Movement: Approximately 0.8 mm
  • Bore Tolerance: 135.08
  • Compliancy: RoHS
  • Component Bore Diameter: 135mm
  • Hub Pressure: 180
  • Installation Torque: 68 Nm
  • Internal/ External: Internal
  • Material: Steel
  • Metric/Inch: Metric
  • Releasing/ Locking: Locking
  • Screw Size: M10 x 30
  • Self-Centering: Yes
  • Shaft Diameter: 95mm
  • Shaft Tolerance: 94.95
  • Taper: Single
  • Thrust: 219688

Average Customer Rating

Not yet rated

To write a review you must Log In

Need Help?

Please only use this form for questions or comments specifically related to products or information on this particular page. For any other questions or comments, please use our general contact us form.



Back To Top